HACKER SAFE certified sites prevent over 99.9% of hacker crime.

HOME  I  POOL STORE  I  POOL PARTS  POOL COMMUNITY  I  CONTACT US

Poolguard pool alarms, Pool Guard swimming pool alarm
NEW 2008 MODEL!

alarms_inground-image-2.jpg (7309 bytes)

   POOLGUARD POOL ALARM w/ SMARTCHIP

cyanbull.gif (967 bytes) Sturdy, dependable unit rests on pool's edge. For pools up to 800 ft
cyanbull.gif (967 bytes) Senses water displacement if an object over 15 lbs. falls in pool.
cyanbull.gif (967 bytes) 85 decibel pool alarm sounds at pool and at remote location.
cyanbull.gif (967 bytes) Convenient carrying handle, very sturdy swimming pool alarm.
cyanbull.gif (967 bytes) Can be used with a winter cover, solar blanket or automatic cover.
cyanbull.gif (967 bytes) Used at Dick Cheney's Vice Presidential Swimming Pool!

POOLGUARD IN GROUND POOL ALARM w/ SMARTCHIP
MODEL PGRM-2 - 2008 model

The POOLGUARD POOL ALARM has been on the market since 1982 and is made in the USA. POOLGUARD is completely portable and comes with an in house remote receiver. The POOLGUARD POOL ALARM features are listed below:

The POOL ALARM uses one 9-volt battery (not included) — battery life is approximately 1 year.

The pool safety alarm will sound at the pool and in the home at the same time.

The POOL ALARM automatically resets after 5 minutes of alarming.

The POOLGUARD SYSTEM can be used in a pool up to 800 sq. ft. in area.

The POOL ALARM has a complete functional test feature every time it is installed in the pool.

POOLGUARD has a three-year warranty.

POOLGUARD maintains a full customer service department for your convenience.

The REMOTE RECEIVER comes with a 9-volt power supply or it can be plugged into any 110-volt outlet in the house.

The POOL ALARM sets stationary on the side of the pool and is easily removed for swimming.

The range of the REMOTE RECEIVER is up to 200 feet from the POOL ALARM.

The POOL ALARM requires NO ropes, wires, tie downs or deck anchors. The POOL ALARM is user friendly and completely portable.

The POOLGUARD POOL ALARM can be used with a solar blanket or winter cover and pool cleaners will not set off the alarm.

 The Poolguard PGRM2 has a depth of 11" from the bottom where it rests on the pool's edge, to the bottom of the portion that is under water. 

The NEW MODEL PGRM-2 introduces "NEGATIVE DISPLACEMENT TECHNOLOGY", a new sensing method that requires no adjustments. Entry into the pool by children, pets, or intruders is detected by the unit's electronic sensor, and sets off a loud, pulsating alarm both in the home and at the pool. Safe, simple, and easy to operate, the 9-volt battery powered alarm does not require tie-downs, ropes, or wires. Poolguard comes with a remote receiver which sounds an alarm inside the home when the unit is activated at the pool. The Poolguard alarm system can be used with a solar blanket on the pool. Poolguard comes with a limited three year warranty. Meets all ASTM safety standards for pool alarms: ASTM-PS 128-01.

alarmin-b.jpg (15001 bytes)

Poolguard Model PGRM-2

remote-receiver.jpg (6319 bytes)

Remote Receiver

             


POOLGUARD ALARM PGRM-2 - 2008 Model with Remote Receiver....$187.00     

Please Note: Manufacturer recommends deck drilling for maximum stability; although drilling is optional. Pin may be removed to avoid drilling.


NOTE: The PGRM-2 operates on 110V, 60 hz. If you need 220V, 50 hz
            for European Pools, please select our Poolguard 220V European Pool Alarm

ORDER STATUS  I  LIVE CHAT  I CLEARANCE  I  GUARANTEE / RETURNS  I  PRIVACY / SECURITY  I  SHIPPING  I  INTERNATIONAL  I  TESTIMONIALS  I  VIEW BASKET