Polaris 180 Vac Sweep Pressure Side In-Ground Pool Cleaner

The Polaris 180 swimming pool cleaner offers superior cleaning with a sturdy, long lasting design. The Vac Sweep 180 will clean the pool floor, steps and walls in three hours or less. It is powered by a booster pump (sold separately). It vacuums, sweeps, and scrubs any size or shape in-ground pool, be it gunite, fiberglass or vinyl. The large bottom opening picks up large debris like leaves and pebbles.

The Polaris 180 is covered by the Polaris Pool Systems 1-year limited warranty with over one thousand warranty service centers to give you assistance. (like us!)

Features:

• For in-ground pools (Gunite, fiberglass or vinyl) of any shape or size
• Vacuums, sweeps and scrubs the bottom, walls and steps
• Cleans your pool in 3 hours or less
• Large bottom opening picks up large debris
• Runs off a separate booster pump, working independently from the rest of your pool system
• 1 Year Warranty

	Polaris 180 Pool Cleaner Owner's Manual
	Polaris 180 Pool Cleaner Data Sheet

Polaris Unibridge Main Drain Cover Add-on

Prevents Automatic Pool Cleaners from getting stuck on your swimming pool drain.

Made by Polaris®, The Unibridge™ fits over most raised anti-vortex main drain covers to create a surface for pool cleaners to travel over without getting stuck. Allows for flow to the drain while allowing a smooth surface for any pool cleaner to travel over easily.

• For use on inground pools with automatic pool cleaners
• Unibridge snaps together easily, rests on top of your inground pool's main drain
• Main drain's performance unaffected by Unibridge
• Works for ALL types/brands of automatic pool cleaners
• 20" diameter

WARNING: Unibridge is NOT a suction outlet (drain) cover, nor is it permanently installed. Unibridge is NOT intended to be a suction outlet cover. Furthermore, it is NOT intended to take the place of (or replace) a properly and permanently installed suction outlet cover which is compliant with the Virginia Graeme Baker (VGB) Pool & Spa Safety Act and with ASME/ANSI A112.19.8 (2007 or later). Unibridge MUST ONLY be used with a properly installed, VGB-compliant suction outlet cover.