| |
 
|
| |
|
|
| |

|
Pumice Stone
Pool Blok is a pumice stone tile and concrete cleaner. It removes lime, rust, stains and algae from ceramic tile, molded or pneumatic formed concrete surfaces.
There is no need to drain your pool since the Pool Blok floats! It is chemically neutral and won't upset pool pH balance or harm hard surfaces. The Pool Blok cleans even where the strongest acid cleaners have failed.
Do not use a pumice stone on your vinyl liner pool surfaces.
|

Filter Flosser - Click to Enlarge
Click for Filter Flosser Close-Up |
Filter Flosser Pool Cartridge Cleaner
Damage Free! Preserve Your Filter's Life!
Filter Flosser provides a powerful, evenly dispersed spray that gets in between the pleasts of your cartridge filter acting like a water pick; it also generates a water and air agitation action that works out the dirt deposits down deep in the cartridge. With its huge sirface cleaning area, filter flosser requires 50% less time, 50% less labor, and 50% less water!! You can use filter flosser to clean you pool filter cartridge three different ways; Horizontal, vertical and converged!
Filter Flosser fits a standard garden hose and works on all major pool and spa filters.
Filter Flosser Cleans 3 ways:

Horizontal 
Converged 
Vertical |
| Item No. |
Description |
Price |
|
| A2199 |
Filter Flosser Pool Cartridge Cleaner |
$39.99 |
|
 |
Water-Wand Filter Cartridge Cleaner
Experience the magic of the Water Wand Cartridge Cleaner!
Perfect for pools and spas, the all new hand held cartridge cleaner makes cleaning grimy cartridges a breeze! Simply attach the Water Wand to your garden hose and flip on the switch. Watch as multiple fan nozzles spray a high pressure blast of water, cleaning both sides of your filter. The fingers on your Water-Wand will clean 8 pleats at a time in a matter of minutes.
This magical device eliminates splash back, decreases water waste, and saves you precious time! |
| Item No. |
Description |
Price |
|
| A1920 |
Water-Wand Filter Cartridge Cleaner |
$26.99 |
|
 |
Filter Savers Skimmer Sock - 5 Pack
The Filter Saver skimmer sock fits all skimmer baskets like a glove. Elastic band holds them tight on the edge to catch small debris that would clog up the pump or filter. Great for pine needles, pollen, and the fine spring debris from flowering trees and shrubs.
Filter Saver is sold in packs of 5. Each filter saver skimmer sock is made of nylon and can be used for months. |
| Item No. |
Description |
Price |
|
| A2190 |
Filter Savers Skimmer Sock - 5 Pack |
$9.99 |
|

|
Swimming Pool Leaf Trap
Pool Leaf Trap w/ Clear Lip. Trap leaves and debris to prevent clogging of pump basket and filter.
- Reduces frequency of pump and filter maintenance
- Attaches to suction type automatic pool cleaners
- Twist-On Lid with Quick Action Release Button
- 9" (Male x Male) Length of Vac Hose Included
- 1-1/2" Hose Connections (Lid = Female; Body = Male)
- Heavy-Duty Handle Molded On
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| 58309-000-000 |
E9897 |
Swimming Pool Leaf Trap Twist Lid W/ Quick Release Button |
$50.26 |
|

|
Pentair Pool Leaf Trap
The Pentair "Snap Open" Leaf Trap - 186A - features a clear chamber and snap open lid. It has a large molded handle for ease of use. This leaf trap captures large amount of leaves, twigs, rocks, and other debris in it's polyester bag. Use the leaf trap with vacuum heads or automatic suction type pool cleaners.
1 1/2 inch model. Includes 3 feet of 1 1/2 inch hose.
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| R211084 |
E9898 |
Pentair Pool Leaf Trap w/ Snap Open Lid |
$65.64 |
|
|
Pole Pivot - Pole End Angle Connector
Pole Pivot has a rugged push-button release mechanism that can pivot and lock any net,brush or vac-head from straight-out into desired 22.5 degree increments to a full 90 degrees.
Cleaning debris from the pool floor is now quicker and easier. Just click Pole Pivot to its 22.5-degree position, attach your Vacuum Head and then just turn the pole clockwise or counter clockwise to steer right or left.
No more straining and pushing the pole sideways to direct the vac head toward debris!
With its flared hole guides, easily connect your favorite net or brush quickly with no pinched fingers!Leave Pole Pivot connected to your pole so you can quickly attach use any tool, at desired angle, at any time. |
| Item No. |
Description |
Price |
|
| A1660 |
Pole Pivot - Pole End Angle Connector |
$12.99 |
|
|
Drain King Pool Primer 1 1/2" - 3"
Suspect that your skimmer line may be clogged with acorns, sticks, leaves or other debris? Attach the Drain King to a garden hose, insert into the pipe coming into the filter pump, and turn on the hose.
The drain king expands to fit the pipe, placing the line under pressure. A useful "water hammer" in any pool owners toolbox. Also good for kitchen and bathroom sinks or floor drains.
This Drain King expands up to 3 inches. Visit our Drain King Page to see our full selection of Drain Kings!
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| 186 |
E9889 |
Drain King Pool Primer 1 1/2" - 3"
For Kitchen Sinks, Bathtub, Showers, Washing Machines and Swimming Pool Lines |
$14.20 |
|
More Pool Pole and Vacuum Hose Accessories
|
 |
 |
 |
White Rubber Hand Grip for Poles |
Metal Cam Set for Poles |
E-Z Lock Cam for Poles |
| $2.00 |
$8.58 |
$6.84 |
A White Rubber Hand Grip Used on Pool Poles |
Cam fits 1-1/8 in. OD drawn tubes Sleeve fits 1-1/4 in. OD |
Replacement for all Outer-Locking 2-Piece Poles |
|
|
|
|
 |
 |
Telescoping Pole Hanger |
Ball-Bearing Vacuum Wheels |
| $6.99 |
$17.32 |
Swimming Pool Telescoping Pole Hanger Used for Skimmer Net & Vac Accessories |
Pentair Ball-Bearing Vacuum Wheels (4 pcs) |
|
|
|
 |
 |
Metal Handle w/ Swivel |
Universal Replacement Handle |
| $23.70 |
$3.50 |
Vacuum Replacement Handle Fits most swimming pool vacuums |
Fits All Vacuum Heads Including Pin And Quicksnap |
|
|
|
 |
 |
 |
Pin for Replacement Handle |
Butterfly Clips — Pole Attachment |
Vacuum Hose Repair Cuff — 1 1/4" |
| $1.40 |
$1.99 |
$3.13 |
Holds Vac Head Handle Fits Any Vacuum Head (3 pcs) |
Standard V Clip, Connects to: Brushes, Nets, Vac Heads to Poles |
Repair Hose Cuff Cuff Diameter: 1.25" |
|
|
|
|
 |
 |
 |
Vacuum Hose Cuff — 1 1/2" |
Vacuum Hose Coupling — 1 1/2" |
Vac Hose Swivel Cuff — 1 1/2" |
| $3.80 |
$6.47 |
NLA |
Repair Hose Cuff Cuff Diameter: 1.5" |
Repair Coupling Coupling Diameter: 1.5" |
Repair Cuff w/ Swivel Cuff Diameter: 1.5" |
|
|
|
No Longer Available
|
|
|
|
| |
|