E-Z Joint Seal Self-Leveling Expansion Joint Sealant

Available in 10.3 oz. cartridges or 29 oz. cartridges See Coverage Chart at Bottom of Page Since 1997, the first and still the very best formula of Oxime Neutral Cure 100% Silicone Rubber Expansion Joint Sealant! 2 year shelf life. Can be installed in temperatures as low as 0° F. Easy clean-up. UV stable with a 50 year life expectancy. Low odor, non-shrinking, and non-corrosive. No mixing, pouring into different containers, or primer is needed. No waste. Excellent self-leveling pool caulk with a non-porous, easy to clean surface. Surface skins over in 20 minutes to 2 hours (depending on age of product) and foot traffic can be allowed after 12 hours. Not affected by rain after 2 hours. 

10.3 oz Caulk
Manuf#: A7855
Item#: A7855
$24.99
Qty.
29 oz Caulk
Manuf#: A7860
Item#: A7860
$49.99
Qty.

Overview
Top
Back to
See Coverage Chart at Bottom of Page
No mixing, pouring into different containers, or primer is needed. No waste. Excellent self-leveling pool caulk with a non-porous, easy to clean surface. Surface skins over in 20 minutes to 2 hours (depending on age of product) and foot traffic can be allowed after 12 hours. Not affected by rain after 2 hours.
EZ PATCH TAN CAULK EZ PATCH WHITE CAULK
View Online Pool Caulking Training Video

Not affected by rain after 2 hours.E-Z Patch® 23E-Z Patch® 23 “E-Z Joint Seal†Self-Leveling Expansion Joint Sealant Repair Video ClipEZ PATCH 23- Coverage Chart10.3 oz. CartridgeDEPTH OF JOINT*WIDTH OF JOINT1/41/23/411/424'12'9'6'3/818'9'7'4 1/2'1/212'6'4 1/2'3'Example: One cartridge will fill a joint 1/2 wide by1/4 deep by 12 feet long.*Depth of joint should be 1/3 to 1/2 the width ofjoint. (1/4 minimum depth)Back To E-Z Joint Seal Repair products

Specifications
Top
Back to

EZ PATCH 23  & Sonneborn NP1 - Coverage Chart

10.3 oz. Cartridge

DEPTH OF JOINT* WIDTH OF JOINT
1/4" 1/2" 3/4" 1"
1/4" 24' 12' 9' 6'
3/8" 18' 9' 7' 4 1/2'
1/2" 12' 6' 4 1/2' 3'
Example: One cartridge will fill a joint 1/2" wide by 1/4" deep by 12 feet long.
*Depth of joint should be 1/3 to 1/2 the width of joint. (1/4" minimum depth)
Reviews
Top
Back to
Write a Review

Fields marked* are required