Value Guard Seals

The Shaft Seal prevents water from seeping along the shaft and draining out behind the impeller.

Value Guard Seals - Buna Graphite plastic, Stainless Steel with ceramic mating ring.

    20mm Seal for Speck Pump #2920343310 - Vgm-2920
    Manuf#:
    Item#:ZSPE1030
    $13.86 Qty.
    Value Guard 5/8in Seal - Vg1000
    Manuf#:
    Item#:ZUSS0006
    $7.05 Qty.
    5/8in VALUE GUARD PUMP MOTOR SHAFT SEAL - VG2131
    Manuf#:
    Item#:ZUSS0007
    $4.83 Qty.
    3/4" VALUE GUARD SEAL - VG601
    Manuf#:
    Item#:ZUSS0008
    $9.70 Qty.
    U.S. Seal Pool Pump Seal Number 200 5/8in Shaft Size - VG-200 AS-200 PS-200
    Manuf#:
    Item#:ZUSS0009
    $7.20 Qty.
    U.S. Seal Pool Pump Seal Number 201 3/4in Shaft Size - VG-201 AS-201 PS-201
    Manuf#:
    Item#:ZUSS0010
    $7.99 Qty.
    U.S. Seal Pool Pump Seal No. 100 5/8in Shaft Size - VG-100 AS-100 PS-100
    Manuf#:
    Item#:ZUSS0011
    $4.87 Qty.
    VG POOL PUMP SEAL - VG163, FITS U109-68SS, 040-029, 009-2001 SHAFT SEA
    Manuf#:
    Item#:ZUSS1031
    $10.08 Qty.
    Usseal 1 Value Guard Seal Assembly - PS360
    Manuf#:
    Item#:ZUSS1032
    $17.56 Qty.
    5/8 in. Foam Backer Rod - 1 ft. (12 in.)
    Manuf#:
    Item#:ZUSS1033
    $4.84 Qty.
    Hayward Motor Shaft Seal Assembly for PowerFlo Above Ground Pool Pump
    Manuf#:
    Item#: ZHAY6725
    $19.27 Qty.

    Overview

    Top

    Back to

    Pool Motor Repair Tips:

    • Replace your Shaft Seal whenever you replace the motor, or if your pool pump is leaking down the back side of the seal plate, onto the ground below.

    For information on replacing pool motors, seal or capacitor, Visit our Pumps and Motors Technical Arcticle in our Pool Info Section.

    U.S. Seal Pool Pump Seal No. 100 5/8in Shaft Size - VG-100 AS-100 PS-100

    This Pump Seal Replaces the following Manufacturer Pump Seals:
    • Anthony - 04547
       
    • Pentair Purex / Hydrotech L-Seriesâ„¢ - P28280
       
    • Pentair Sta-Rite Industries AJ Series -  U109-93SS
       
    • Pentair Sta-Rite Industries Dura-Glas®- Pre 1998 - Dura-Glas® - U109-93SS
       
    • Pentair Sta-Rite Industries Max-E-Glas®- Pre 1998 - U109-93SS
       
    • Pentair Sta-Rite Industries PLBC Series - 17351-0102S
    • Pentair Sta-Rite Industries PLBC Series Pre 1995 - U109-93SS
       

    VG POOL PUMP SEAL - VG163, FITS U109-68SS, 040-029, 009-2001 SHAFT SEA

    Pool Motor Repair TipsThisPump Seal Replaces the following Pump Seals:Sta-Rite U-109-68SSAmpro 504-DLomart 040-027Lomart 040-029Diaclear 35100Muskin 009-2001The Shaft Seal prevents water from seeping along the shaftand draining out behind the impeller. A Swimming Pool Shaft seal is inexpensive but critical inpreventing water from causing damage to the motor. Replace your Pool Pump Shaft Seal whenever you replace themotor, or your pool pump is leakingdown the back side of the seal plate, and onto the ground below.Back To Swimming Pool Motors, Mechanical Shaft Seals, MotorCapacitors, Motor Bearings, Pool Motor Bearing ToolsInformation on changing the Pump seal

    U.S. Seal Pool Pump Seal Number 200 5/8in Shaft Size - VG-200 AS-200 PS-200

    This Pump Seal Replaces the following Pump Seals:
    • Aqua-Flo Circ-Master - 92500150
    • Aqua-Flo Dominator - 92500150
    • Aqua Flo Flo-Master FMHP Series - 92500150
    • Aqua Flo Pond-Flo - 92500151
    • Aqua Flo Tub-Master - 92500150
    • Astral Pool Sena Series 1800
    • Arneson Pool Sweep - A-8
    • Baker-Hydro - 35B1178
    • Doughboy - 306-1006
    • Hayward Cast Iron - SPX1250XZ2
    • Hayward Turbo-Flo - SPX2700SA
    • Jacuzzi A Series - 10000206R
    • Jacuzzi Cygnet Series - 10-0002-06
    • Jacuzzi J Series - 10000206R
    • Jacuzzi JCM Series - 10000206R
    • Jacuzzi K Series - 10000206R
    • Jacuzzi KM Series - 10000206R
    • Jacuzzi LCM Series - 10-1436-00
    • Jacuzzi LCU Series - 10143600R
    • Jacuzzi LR-Series - 10-1436-00
    • Jacuzzi Pump LRDV - 10000206R
    • Jacuzzi Pump LVL - 10000206R
    • Pentair Pac-Fab Challenger - 35-4545
    • Pentair Pac-Fab Dynamite - 35-4545
    • Pentair Pac-Fab Dynamo - 35-4545
    • Pentair Pac-Feb Dynatron - 35-4545
    • Pentair Pac-Fab Pinnacle- 354545
    • Premier Model 325
       
    • Premier Model 225
       
    • Premier Model 255
       
    • Speck Pumps - 2920060603
       
    • Speck Pumps - 60603-200
       
    • Sta-Rite Dura Glass - 17304-0100S
    • Sta-Rite Max-E-Glas - 17304-0100S

    U.S. Seal Pool Pump Seal Number 201 3/4in Shaft Size - VG-201 AS-201 PS-201

    This Pump Seal Replaces the following Manufacturer Pump Seals:
    • American Products Americana® Series - 395005
    • American Products Bronze-Noryl® Series - 395005
    • Hayward Max-Floâ„¢ Series - SPX1600Z2
    • Hayward Super Pump® Series - SPX1600Z2
    • Hayward Super Pump IIâ„¢ Series - SPX1600Z2
    • ITT Marlow Argonaut® Series - 38592-00
    • ITT Marlow Mardur® Series - 38592-00
    • Jacuzzi Magnum® Series - 10-1502-09
    • Jacuzzi RC-Series - 10150209R
    • Jandy Stealth SHP Series - R0445500
    • Jandy Plus HP PHP Series - R0445500
    • Jandy Stealth MHP Series - R0445500
    • Pentair Pac-Fab Hydropump® - 354001
    • Premier 120T Series - 31-812
    • Premier MKII Series - 31-812
    • Premier 300/325/355 Series - 31-812
    • Premier 725/756 Series - 31-812
    • Pentair Purex / Hydrotech AH Seriesâ„¢ - P28300/071728
    • Pentair Purex / Hydrotech L-Seriesâ„¢ - P28300/071728
    • Pentair Sta-Rite Industries Dura-Glas II® - Pre 1998 - U109-372SS
    • Pentair Sta-Rite Industries Dura-Glas II® -U109-358SS
    • Pentair Sta-Rite Industries Dura-Jet - U109-358SS
    • Pentair Sta-Rite Industries Dura-Jet After Jan. 2001 - 37400-0027
    • Pentair Sta-Rite Industries Dyna-Glas® - 37400-0027
    • Pentair Sta-Rite Industries Dyna-Max® - 37400-0027
    • Pentair Sta-Rite IndustriesDyna-Glas® After June 2000 - 37400-0027S
    • Pentair Sta-Rite Industries Dyna-Max® After June 2000 - 37400-0027S
    • Pentair Sta-Rite Industries JW Series - U109-358SS
    • Pentair Sta-Rite Industries JWPA Series - U109-358SS
    • Pentair Sta-Rite Industries JW After Jan. 2001 - 37400-0027S
    • Pentair Sta-Rite Industries JWPA Series After Jan. 2001 - 37400-0027S
    • Pentair Sta-Rite Industries Max-E-Glass II® - U109-358SS
    • Pentair Sta-Rite Industries Max-E-Glass II® - U109-358SS
    • Pentair Sta-Rite Industries Swim-Quip XL Series - 37407-0009
    • Pentair Sta-Rite Industries Swim-Quip VI Series - 37407-0009
    • Pentair Sta-Rite Industries Swim-Quip VII Series - 37407-0009

     

    5/8 In Value Guard Mechanical Shaft Seal

    5/8" VALUE GUARD SEAL - VG501 This seal is compatible with the Purex/Hydrotech Aquatron®

    Mechanical Shaft Seal - The Shaft Seal prevents water from seeping along the shaft and draining out behind the impeller.

    Pool Motor Repair Tips: Replace your Shaft Seal whenever you replace the motor, or your pool pump is leaking down the back side of the seal plate, and onto the ground below. For information on replacing pool motors, seal or capacitor; Visit our Pumps and Motors Technical Arcticle in our Pool Info Section.

    3/4" VALUE GUARD SEAL - VG601

    This Value Guard Seal is compatible with the Acura Spa Systems Aquaheat, Aquaheat Plus Magnaflow, Magnaflow 56, Maverick, Supercharger, Supercharger II, Jandy HHP, HHPU, MHP, MHPU.

    Value Guard 5/8in Seal - Vg1000

    VALUE GUARD 5/8" SEAL - VG1000Pump Seal Replaces the following Pump Seals:American Products Americana II 397012American Products Bronze-Bronze 397012American Products Eagle 397012American Products Maxim 397012American Products Power-Glass 397012American Products Ultra Flo 397012Anthony XL600 04380Aqua Flo A-Series 92509040Aqua Flo B-Series 92509040Aqua Flo D Series 92509040Polaris Vac Sweep P-55Premier 455/456 Series 31-813Premier 500 Series 31-813Premier 600 Series 31-813Purex/Hydrotech Whisperflo P28323Sta-Rite A-J Series U109-93SSSta-Rite D series U-109-220Sta-Rite JS/JT/JW Series U-109-358SSThe Shaft Seal prevents water from seeping along the shaftand draining out behind the impeller. A Swimming Pool Shaft seal is inexpensive but critical inpreventing water from causing damage to the motor. Replace your Pool Pump Shaft Seal whenever you replace the motor, or your pool pump is leaking down the back side of the seal plate, and onto the ground below.

    5/8in VALUE GUARD PUMP MOTOR SHAFT SEAL - VG2131

    5/8" VALUE GUARD SEAL - VG2131 Compatible with the following: Aqua-Flo Flo-Master®, Tub-Master®, Hayward Power-Flo IIâ„¢, Power-Flo Matrixâ„¢, Power-Flo LXâ„¢, Turbo-Flo®, Please Call for Hayward Power-Flo IIIâ„¢

    Usseal 1 Value Guard Seal Assembly - PS360

    USSEAL 1" Premium SEAL ASSEMBLY - PS360 This seal assembly is compatible with the Purex C-Series P28175 / 071725

    20mm Seal for Speck Pump #2920343310 - Vgm-2920

    20MM SEAL FOR SPECK PUMP #2920343310 - VGM-2920This 20mm seal is compatible with the Speck Pump #2920343310.Mechanical Shaft Seal - The Shaft Seal prevents water from seeping along the shaft and draining out behind the impeller.Pool Motor Repair Tips:Replace your Shaft Seal whenever you replace the motor, or your pool pump is leaking down the back side of the seal plate, and onto the ground below. For information on replacing pool motors, seal or capacitor, Visit our Pumps and Motors Technical Arcticle in our Pool Info Section.

    Reviews
    Top
    Back to