White Pool Plaster Repair Kit, Fast Set
Our Fast Set swimming pool plaster mixture can be used for underwater or above water repairs. The best pool plaster to use for fast repairs in cold weather or when painting or coating plaster. The EZ Patch plaster patch kit contains bonding agent in a separate bottle in the container.
Prep the area before patching by cleaning and roughening the surface to improve the bond. Dirt, grease, scale etc can prevent a proper bond. If you are patching plaster underwater, use a stainless steel brush to scrub clean, and roughen the surface and edges. Small areas of under 1 sq. ft. are good candidates for underwater patching. Small cracks of 1-2 ft, basketball sized pop-offs or golf ball sized divots can be patched well, but larger areas present more of a challenge, and dry patching would be recommended.
EZ Patch 1 F.S. 3 lb pail will cover 1 sq. ft. at 3/8in thickness. A 10 lb pail will cover 3.3 sq. ft. at 3/8in.
Just mix, add some water and mix until you get a spreadable mix. Smooth this over areas of plaster delamination, or use to fill plaster cracks, or cover up areas where the gunite is showing through the plaster. (See video for pool plaster repair surface prep, application and curing instructions).
Note: If you need to repair an upgraded “bright white” plaster, add a bright white colorant like Titanium Dioxide to our mix to make our pool plaster a brighter white. 3 & 10 lb kit (50 lb kit can be special ordered)
E-Z Patch® 1 WhitePool Plaster Repair Video ClipBack To E-Z PatchConcrete & Plaster Repair products.