Parts for AQUABOT ULTRAMAX Robotic Pool Cleaner,AQUABOT ULTRAMAX parts,discount AQUABOT ULTRAMAX pool cleaner parts

Aquabot UltraMax Swimming Pool Cleaner Parts

Aquabot Ultra Max Pool Cleaner Parts, Parts for Aquabot Ultramax Pool Cleaners
Schematic Diagram of Parts for Aquabot UltraMax Robotic Pool Cleaner

NLA - No Longer Available Cells NLA - No Longer Available Cells

No.	Item No.	Description	Price
1	A10200	Handle Assembly (Blue & White, Bracket included) -Ultramax	$140.55
2	S1100B	Handle Bracket (Blue) -Al Aquabot except T2 and T4, All AquaMax, All UltraMax cleaners listed	$35.38
4	11003	Clevis Pin (Round Head, hole in end) -Use to link the Handle Assembly arm to the Handle Bracket	$4.08
6	11004	Washer (St. Steel) -Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket	$2.19
7	11005	Cotter Ring (Aluminum, 3/16") -Use at end of the Clevis Pin to hold the Handle Bracket	$2.98
8	1105	Screw (10-32, 7/8", Phil Pan Head) -Use to fasten the Handle Bracket to the Body Assembly	$1.95
9	2701	Screw (#8, 11/16", Phil Pan Head) -Use to fasten the Handle on UltraMax to Shell	$1.90
---	2500	Screw (#8, 1-1/4" Pan Head) -Use on Drive Motor Spacer Bracket if necessary	$1.82
11	11006	Hook (St. Steel, Snap-Hook, Eyelet for Pin) -Used to fasten Rope Assembly to Handle on large cleaners	NLA	No Longer Available
12	2111	P-Clip (5/8", Coated Steel) -Use to fasten the insulated part of a 4, 7, 9-wire cable to the Handle Assembly	$3.49
12	2112	P-Clip (11/16", St. Steel) -Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly	$3.49
12	2103	P-Clip (11/16", Plastic) -Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly	$1.87
13	2700	Screws (#8, 11/16", Phil Pan-Flat Head) -Use to fasten P-Clips, Side Plates, and Drive Motors	$1.82
14	2260	Screws (#6, 7/16", Phil Pan-Fan Head) -Use to fasten P-Clips, and Side Plates on Jet and Rover cleaners	$1.95
15	1638	Plug (9-Pin, Female, 9-Wire) -UltraMax / Jr. -Only for end of the Cable the plugs into Power Supply	$48.40
16	S7935	EZ-Swivel (For 4, 5, 7, or 9-Wire Cable) -Can be used on any Cable Assembly with 4 or more wire	$60.79
17	A16125	Cable Assembly (9-Wire, 120 Foot, Floating) -Ultramax Jr., UltraMax	$723.44
17	A16159	Cable Assembly (9-Wire, 150 Foot, Floating) -Ultramax Jr., Ultramax ** Optional extra length	$1101.75
---	1602	Float Ball (Large) -for cable Assembly ** Position it the same distance from unit as maximum depth of pool	$5.14
20	A8326	Rope Assembly (Blue & White, Nylon) -Ultramax, Power Handi-Vac 300	$60.08
21	8329	Connector (Sky Blue) -Use on Rope Assembly to form a 'Y' shape to attach to sides of the Handle Assembly	$5.37
21	8331	Connector (Stainless Steel) -For making small loops in the Nylon Rope Assembly	$7.25
25	2240B	Outlet Top (Top, Bottom, & Cap) -UltraMax Jr. , Ultramax	$39.84
26	A22000NOHOLE	Body Assembly (1/2 of machine, White, with Holes, Lock Tabs, Outlet Ring, Inserts) -Ultramax (Half of body)	$224.31
26	A22200	Body Assembly (Complete, White, Lock Tabs, Outlet Ring, Inserts, Inner Side Plates) -Ultramax (entire body)	NLA	No Longer Available
---	8351	Flat Plug (White, Plastic) -Use to plug large holes on the Body Assembly	$1.87
27	2251	Screw (8-18 x 3/4, Phil Small Head) -Use for Pump to Body in some cleaners, and Jet Valve Assembly	$1.82
28	2204	Outer Body (Large, Beige) -Ultramax	$106.01
---	2400	Nail Plug (White, Plastic) -Use to plug small holes on the Body Assembly	$1.87
30	SP3402	Lock-Nuts (Hex, Nylon Insert) -For various uses: Side Plat Bolts, Anti-Roll Brackets, Pole Handle Assembly	NLA	No Longer Available
36	SP9204BL	Lock-Tabs (Blue, Plastic) -For all Body Assemblies, used to hold Bottom Lids to base of cleaners	$5.15
38	2303	Screws (18-8m, 8/32" x 1/2:, Phil Bev Head) -Use to fasten the Lock-Tabs to the Body Assembly	$1.82
39	7133	Lock-Nut (Nylon Insert, Hex) -Use to fasten the crews of the Lock-Tabs	$3.30
43	8323	Screw (3-1/4", Phil Pan Head, Long) -Use to fasten Body Assemblies together on top of Ultramax	$3.49
44	2019	Spacer (2-1/8", PVC, White) -Use to space apart Body Assemblies between the Ultramax	$1.82
45	S3400B-6H	Side Plate (Blue, 4 holes for Bolts, 2 holes to Motor) -Aquabot Plus RC / Ultra, AquaMax / BiTurbo, Ultramax / Jr.	$31.42
46	A3400W	Side Plates (Short Legs) -Use between Body Assemblies on the UltraMax	NLA	No Longer Available
49	3401	Screw (Bolts, Long, for Side Plates) -Aquabot Plus RC, Aquabot Ultra, All AquaMax & Ultramax units	$13.82
50	8307	Screw (Bolts, Extra-Long) -Use to fasten Bodies together through the Middle Side Plate on the UltraMax	$1.74
51	2600PK	Bushing (White, Plastic) -Pack of 4 All Aquabot cleaners, All listed AquaMax and Ultramax cleaners	$13.46
54	3500	Small Roller (White, Plastic) -Supports the Drive Track, install on lower legs of Side Plate	$3.86
56	3506	Stepped Sleeve Roller (White) -Thicker end supports Drive Belts, Install on upper Side Plate legs	$3.95
57	SP3302	Drive Belts -Tan	$19.51
58	A3605	Pulley Assembly (Medium, ~2.75 in.) -Use for cleaners with Black Drive Motors	$35.04
58	A3608	Pulley Assembly (Long, Old, ~3.5 in.) -*** See Drive Motor Spacer Bracket # 8299	$35.73
---	3607	Washer - Use on all Pulley Assemblies, -Use on Moveable Axle of Jet / Rover cleaners, Rounded edges facing forward	$7.37
---	SP3502	Tension Device (Old, replaced by Stepped Sleeve Rollers) -Formerly used to add tension to Drive Belts	$38.62
60	A6010U	Pump Motor	NLA	No Longer Available
61	4400	Propeller -All cleaners	$14.13
---	7109	Washer (St. Steel) -Use with # 2500 Screw against Body Assembly to fasten Drive Motor Spacer Bracket	$2.20
79	A2241S	Junction Box Assembly (Connections: 9-Pin, 2 Pump Motor, 2 Drive Motor) -UltraMax, Ultramax Beach Boy	$212.22
79	A2245S	Junction Box Assembly (Connections: 9-Pin, 2 Pump Motor, 2 IR, 2 Drive Motor) -UltraMax IR, UMAX BB IR	$218.77
80	A8523SL	Drive Motor (Master, Black) -Ultramax Jr., Ultramax	$875.67
80	A8524BBSL	Drive Motor (Master, Black, BB Air Sensor) -UltraMax Jr. Beach Boy, Ultramax Beach Boy	$875.67
80	A8532V	Drive Motor (Slave, Green) -Use for all units which use two Drive Motors	$780.65
---	8299	*** Spacer Bracket (w/ hardware) -Use when older Black Drive Motor Legs are too short for Pulley	$24.78
83	4613	Spiral Pin (3/4", Solid Stainless Steel) -Used in the end of the Drive Motor Shaft, use Lock-Tite	$1.82
86	SP5474	Shrinkable Butt Connectors (Light Blue) -Crimp closed and heat shrink to seal	$3.64
87	SP1617	Shrink Tube (5/16", Blue) -For sealing 2-Wire connections, use under Heat Shrink SP1619	$48.32
87	SP1619	Shrink Tube (1/2", Black) -For sealing 2-Wire connections, use over Heat Shrink SP1617	NLA	No Longer Available
---	SP1611	Shrink Tube (3/4", Blue) -For sealing he Cable insulation below the P-Clip at the Handle Assembly	NLA	No Longer Available
88	1625	Shrink Tube (3/4", Black) -For sealing all medium sized connections at the Junction Box	NLA	No Longer Available
89	SP1614S	Shrink Tube (1-1/2", 2.5", Black) -Service kit for sealing large Cable connections	$3.36
89	SP1614	Shrink Tube (1-1/2", Black) -For sealing wide connections at the Junction Box and Cable Assembly	$48.32
---	A38200	Wheel Tube Assembly (Old, Ultramax)	$73.25
90	A3800MG	Wheel Tube Assembly (New, Ultramax) -Model 'G'	NLA	No Longer Available
91	11058	Retaining Ring (E-Clip, New Style) -Aquabot Turbo, AB Plus RC, Aquabot T4, AB Ultra, All AMAX / UMAX	$2.78
91	11059	Retaining Ring (C-Clip, Req's Snap-Ring Pliers) -Aquabot T2, also for inner Side Plates of Ultramax	$5.12
92	3603	Washer (Nylon, Flat) -Use for all cleaners on the end of Wheel or Wheel Tube Assembly	$1.82
97	SP3002B	Rubber Brushes (Blue Molded Rubber, Short) -Aquabot / Turbo, AquaMax Jr. HT / Jr. Plus, Ultramax ***	$79.57
97	SP3009	PVA Climbing Brushes (Light Blue PVA Foam, Short) -Aquabot / Turbo, AquaMax Jr. units, Ultramax ***	$65.98
---	SP3007	PVA Climbing Rings (Light Blue PVA, 1" thick) -Fit over Rubber Brushes to add more traction **	$28.38
99	3200	Drive Track (Black)	$23.51
99	3201	Drive Track (Blue)	$24.97
99	3203	Drive Track with Traction Tabs (Blue) -For all Model 'G' units - Single	$24.97
100	SP2675	Model G Spacer Bracket ** necessary with 'Model G' Drive Tracks	$6.17
101	8100	Filter Bag (Fine) -Aquabot / Turbo / Plus RC, AquaMax Jr., PHV 100/300, small Jet / Rover, UMAX NLA - Replace with 8111 Below**	NLA	No Longer Available
101	8111	Filter Bag (Fine) -Aquabot / Turbo / Plus RC, AquaMax Jr., PHV 100/300, small Jet / Rover, UMAX **	$48.01
101	8200	Filter Bag (Mesh) -Aquabot / Turbo / Plus RC, AquaMax Jr., PHV 100/300, small Jet & Rover, UMAX **	$49.42
103	5300	Filter Screen (White, Cage) -Aquabot / Turbo / Plus RC, AquaMax Jr., PHV 100/300, small Jet & Rover, UMAX **	$30.65
104	2702	Screw (#6, 11/16", Phil Pan-Flat Head, Pointed) -For fastening the 5300/ 5301 Filter Screen to the Body	$1.95
105	A9200X	Bottom Lid Assembly (White, W-Shaped Wire Frame) -Aquabot, small Jet / Rover, AquaMax Jr., Ultramax ***	$94.09
106	9305BL	Intake Valve Flap (Blue, Plastic) -Fits into Intake of all small # 9200 Bottom Lids	$5.84
110	A7066	Power Supply (9-Pin, Male Socket, Radio RC) -All Ultramax cleaners	$688.27
111	SP7140	Socket Assembly (9-Pin, Male, 9-Wire) -Ultramax Jr., Ultramax	NLA	No Longer Available
---	7143	Dust Cap (Rubber, Looped, Removable) -Ultramax Jr., Ultramax	$1.74
---	7165E	Dust Cap (Plastic, Threaded, Chained) -Ultramax Jr., Ultramax	$1.74
112	7005	Fuse Holder (Standard, Push & Turn style) -Most residential and commercial cleaners	$10.28
---	7002	Fuse (5.0 Amp, 250 Volt, Slow-Blow) -Aquabot Plus RC, Aquabot Ultra, All AMAX, All UMAX, All PHV	$4.69
114	7106	On / Off Lighted Switch (Wide, Standard, Red, 3-Wire) -Use for Power Supply	$11.14
115	7023	Antenna (4", with Hardware) -Aquabot T4 / Plus RC / Ultra, UMAX Jr., UltraMax	$13.44
116	220114C	Transmitter (Radio RC, Grey & Yellow/ Blue/ Red LED Light) -New Units Only - Transmits to A220203FCC Receiver - Older Units will need Kit	NLA	No Longer Available
117	SP7041	Handle (Rubber, with Holders and Hardware) -Ultramax Jr., Ultramax	NLA	No Longer Available
118	7102	Cord for Power Supply (3-Wire, Green, Black, and White) -Use on all Power Supplies	$13.53
119	7272	Outdoor Timer (8hr, Programmable, GFCI) -Use to regulate cleaner's run time when no Auto shut-off	$49.23
---	2007C	Infra Red Sensor -Ultramax / Jr.	$170.37
---	2009	IR Brace Assembly (all hardware included) -Use to hold the IR Sensor in position on the cleaner	$24.17
---	2008	Screws (Use to hold IR Brace inside of Outer Shell) -Screw from outside of shell into IR Brace Assembly	NLA	No Longer Available
---	1609	Tie (Blue, #4 Plastic, Reusable) -Use for coiling the Cable Assembly among other things	NLA	No Longer Available

All Ultra Max Cleaner Parts are Original Aquabot Replacement Parts, and spares for the Aquabot pool
cleaner. To purchase more than 1 Aquabot UltraMax part, select the		button in the Shopping Cart


	Return to POOLCENTER.com's Swimming Pool Cleaner Parts Main Page

Aquabot UltraMax Swimming Pool Cleaner Parts

Aquabot Ultra Max Pool Cleaner Parts, Parts for Aquabot Ultramax Pool Cleaners Schematic Diagram of Parts for Aquabot UltraMax Robotic Pool Cleaner

A10200

Handle Assembly (Blue & White, Bracket included) -Ultramax

S1100B

Handle Bracket (Blue) -Al Aquabot except T2 and T4, All AquaMax, All UltraMax cleaners listed

11003

Clevis Pin (Round Head, hole in end) -Use to link the Handle Assembly arm to the Handle Bracket

11004

Washer (St. Steel) -Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket

11005

Cotter Ring (Aluminum, 3/16") -Use at end of the Clevis Pin to hold the Handle Bracket

1105

Screw (10-32, 7/8", Phil Pan Head) -Use to fasten the Handle Bracket to the Body Assembly

2701

Screw (#8, 11/16", Phil Pan Head) -Use to fasten the Handle on UltraMax to Shell

2500

Screw (#8, 1-1/4" Pan Head) -Use on Drive Motor Spacer Bracket if necessary

11006

Hook (St. Steel, Snap-Hook, Eyelet for Pin) -Used to fasten Rope Assembly to Handle on large cleaners

2111

P-Clip (5/8", Coated Steel) -Use to fasten the insulated part of a 4, 7, 9-wire cable to the Handle Assembly

2112

P-Clip (11/16", St. Steel) -Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly

2103

P-Clip (11/16", Plastic) -Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly

2700

Screws (#8, 11/16", Phil Pan-Flat Head) -Use to fasten P-Clips, Side Plates, and Drive Motors

2260

Screws (#6, 7/16", Phil Pan-Fan Head) -Use to fasten P-Clips, and Side Plates on Jet and Rover cleaners

1638

Plug (9-Pin, Female, 9-Wire) -UltraMax / Jr. -Only for end of the Cable the plugs into Power Supply

S7935

EZ-Swivel (For 4, 5, 7, or 9-Wire Cable) -Can be used on any Cable Assembly with 4 or more wire

A16125

Cable Assembly (9-Wire, 120 Foot, Floating) -Ultramax Jr., UltraMax

A16159

Cable Assembly (9-Wire, 150 Foot, Floating) -Ultramax Jr., Ultramax ** Optional extra length

1602

Float Ball (Large) -for cable Assembly ** Position it the same distance from unit as maximum depth of pool

A8326

Rope Assembly (Blue & White, Nylon) -Ultramax, Power Handi-Vac 300

8329

Connector (Sky Blue) -Use on Rope Assembly to form a 'Y' shape to attach to sides of the Handle Assembly

8331

Connector (Stainless Steel) -For making small loops in the Nylon Rope Assembly

2240B

Outlet Top (Top, Bottom, & Cap) -UltraMax Jr. , Ultramax

A22000NOHOLE

Body Assembly (1/2 of machine, White, with Holes, Lock Tabs, Outlet Ring, Inserts) -Ultramax (Half of body)

A22200

Body Assembly (Complete, White, Lock Tabs, Outlet Ring, Inserts, Inner Side Plates) -Ultramax (entire body)

8351

Flat Plug (White, Plastic) -Use to plug large holes on the Body Assembly

2251

Screw (8-18 x 3/4, Phil Small Head) -Use for Pump to Body in some cleaners, and Jet Valve Assembly

2204

Outer Body (Large, Beige) -Ultramax

2400

Nail Plug (White, Plastic) -Use to plug small holes on the Body Assembly

SP3402

Lock-Nuts (Hex, Nylon Insert) -For various uses: Side Plat Bolts, Anti-Roll Brackets, Pole Handle Assembly

SP9204BL

Lock-Tabs (Blue, Plastic) -For all Body Assemblies, used to hold Bottom Lids to base of cleaners

2303

Screws (18-8m, 8/32" x 1/2:, Phil Bev Head) -Use to fasten the Lock-Tabs to the Body Assembly

7133

Lock-Nut (Nylon Insert, Hex) -Use to fasten the crews of the Lock-Tabs

8323

Screw (3-1/4", Phil Pan Head, Long) -Use to fasten Body Assemblies together on top of Ultramax

2019

Spacer (2-1/8", PVC, White) -Use to space apart Body Assemblies between the Ultramax

S3400B-6H

Side Plate (Blue, 4 holes for Bolts, 2 holes to Motor) -Aquabot Plus RC / Ultra, AquaMax / BiTurbo, Ultramax / Jr.

A3400W

Side Plates (Short Legs) -Use between Body Assemblies on the UltraMax

3401

Screw (Bolts, Long, for Side Plates) -Aquabot Plus RC, Aquabot Ultra, All AquaMax & Ultramax units

8307

Screw (Bolts, Extra-Long) -Use to fasten Bodies together through the Middle Side Plate on the UltraMax

Aquabot Ultra Max Pool Cleaner Parts, Parts for Aquabot Ultramax Pool Cleaners
Schematic Diagram of Parts for Aquabot UltraMax Robotic Pool Cleaner

Handle Assembly (Blue & White, Bracket included)
-Ultramax

Handle Bracket (Blue)
-Al Aquabot except T2 and T4, All AquaMax, All UltraMax cleaners listed

Clevis Pin (Round Head, hole in end)
-Use to link the Handle Assembly arm to the Handle Bracket

Washer (St. Steel)
-Use around the Clevis Pin underneath the Cotter Ring on Handle Assembly Bracket

Cotter Ring (Aluminum, 3/16")
-Use at end of the Clevis Pin to hold the Handle Bracket

Screw (10-32, 7/8", Phil Pan Head)
-Use to fasten the Handle Bracket to the Body Assembly

Screw (#8, 11/16", Phil Pan Head)
-Use to fasten the Handle on UltraMax to Shell

Screw (#8, 1-1/4" Pan Head)
-Use on Drive Motor Spacer Bracket if necessary

Hook (St. Steel, Snap-Hook, Eyelet for Pin)
-Used to fasten Rope Assembly to Handle on large cleaners

P-Clip (5/8", Coated Steel)
-Use to fasten the insulated part of a 4, 7, 9-wire cable to the Handle Assembly

P-Clip (11/16", St. Steel)
-Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly

P-Clip (11/16", Plastic)
-Use to fasten the foam-insulated part of a 9-wire cable to the Handle Assembly

Screws (#8, 11/16", Phil Pan-Flat Head)
-Use to fasten P-Clips, Side Plates, and Drive Motors

Screws (#6, 7/16", Phil Pan-Fan Head)
-Use to fasten P-Clips, and Side Plates on Jet and Rover cleaners

Plug (9-Pin, Female, 9-Wire)
-UltraMax / Jr.
-Only for end of the Cable the plugs into Power Supply

EZ-Swivel (For 4, 5, 7, or 9-Wire Cable)
-Can be used on any Cable Assembly with 4 or more wire

Cable Assembly (9-Wire, 120 Foot, Floating)
-Ultramax Jr., UltraMax

Cable Assembly (9-Wire, 150 Foot, Floating)
-Ultramax Jr., Ultramax ** Optional extra length

Float Ball (Large)
-for cable Assembly ** Position it the same distance from unit as maximum depth of pool

Rope Assembly (Blue & White, Nylon)
-Ultramax, Power Handi-Vac 300

Connector (Sky Blue)
-Use on Rope Assembly to form a 'Y' shape to attach to sides of the Handle Assembly

Connector (Stainless Steel)
-For making small loops in the Nylon Rope Assembly

Outlet Top (Top, Bottom, & Cap)
-UltraMax Jr. , Ultramax

Body Assembly (1/2 of machine, White, with Holes, Lock Tabs, Outlet Ring, Inserts)
-Ultramax (Half of body)

Body Assembly (Complete, White, Lock Tabs, Outlet Ring, Inserts, Inner Side Plates)
-Ultramax (entire body)

Flat Plug (White, Plastic)
-Use to plug large holes on the Body Assembly

Screw (8-18 x 3/4, Phil Small Head)
-Use for Pump to Body in some cleaners, and Jet Valve Assembly

Outer Body (Large, Beige)
-Ultramax

Nail Plug (White, Plastic)
-Use to plug small holes on the Body Assembly

Lock-Nuts (Hex, Nylon Insert)
-For various uses: Side Plat Bolts, Anti-Roll Brackets, Pole Handle Assembly

Lock-Tabs (Blue, Plastic)
-For all Body Assemblies, used to hold Bottom Lids to base of cleaners

Screws (18-8m, 8/32" x 1/2:, Phil Bev Head)
-Use to fasten the Lock-Tabs to the Body Assembly

Lock-Nut (Nylon Insert, Hex)
-Use to fasten the crews of the Lock-Tabs

Screw (3-1/4", Phil Pan Head, Long)
-Use to fasten Body Assemblies together on top of Ultramax

Spacer (2-1/8", PVC, White)
-Use to space apart Body Assemblies between the Ultramax

Side Plate (Blue, 4 holes for Bolts, 2 holes to Motor)
-Aquabot Plus RC / Ultra, AquaMax / BiTurbo, Ultramax / Jr.

Side Plates (Short Legs)
-Use between Body Assemblies on the UltraMax

Screw (Bolts, Long, for Side Plates)
-Aquabot Plus RC, Aquabot Ultra, All AquaMax & Ultramax units

Screw (Bolts, Extra-Long)
-Use to fasten Bodies together through the Middle Side Plate on the UltraMax

Bushing (White, Plastic)
-Pack of 4 All Aquabot cleaners, All listed AquaMax and Ultramax cleaners

Small Roller (White, Plastic)
-Supports the Drive Track, install on lower legs of Side Plate

Stepped Sleeve Roller (White)
-Thicker end supports Drive Belts, Install on upper Side Plate legs

Pulley Assembly (Medium, ~2.75 in.)
-Use for cleaners with Black Drive Motors

Pulley Assembly (Long, Old, ~3.5 in.)
-*** See Drive Motor Spacer Bracket # 8299

Washer - Use on all Pulley Assemblies,
-Use on Moveable Axle of Jet / Rover cleaners, Rounded edges facing forward

Tension Device (Old, replaced by Stepped Sleeve Rollers)
-Formerly used to add tension to Drive Belts

Propeller
-All cleaners

Washer (St. Steel)
-Use with # 2500 Screw against Body Assembly to fasten Drive Motor Spacer Bracket

Junction Box Assembly (Connections: 9-Pin, 2 Pump Motor, 2 Drive Motor)
-UltraMax, Ultramax Beach Boy