The Winter Duck Plug

Save Time - Save Water - Save Covers - Stay Dry

The patent pending duck bill valve allows a large flow of air and water to be blown from return plumbing but does not allow pool water back into the lines.

• Winterizing a pool becomes a one person operation
• Eliminates "burping" of lines
• No need to drain water below returns
• Double seal system provides a water tight seal
• Includes safety cap for ice protection
• Heavy duty rubber is resistant to anti-freeze and other chemicals

The Winter Duck Plug

Leak Locating Dye

These convenient syringe style dye testers are charged with a special concentrated pool dye that holds together underwater. Six inch plastic "needle" allows for precise dye placement without creating unwanted currents.

Use dye testers to help:

• Identify the precise location of structural pool leaks
• Identify water movement into or out of pipes

Our Pool Dye Test Syringes Can be used around:

• Skimmers & Wall Fittings
• Underwater Lights
• Tile Line
• Suspected holes in vinyl liners or cracks in plastered pools

Leak Locating Dye

Flexible Sealer

Nitrile rubber based sealant provides an adhesive bond to most any material found around the swimming pool . . . even vinyl. Squeeze from the tube directly onto the material to be sealed, Flexible Sealer will skin over in seconds allowing it to be flattened with a wet finger. Cures flexible in minutes to hours depending on application thickness. - Seal vinyl leaks with or without a patch - Seal between liner and face plates or fittings - Use as a thread sealant or on small suction side plumbing leaks - Seal small cracks in gunite or plaster - Can be applied underwater.

White Flexible Sealer

Blue Flexible Sealer

Black Butyl Tape

Gap Filler and Light Conduit Sealer

Hand moldable rubber gap filler can be applied underwater without messy caulk guns or mixing. Butyl Tape Retains a flexible, tacky consistency making it well suited for a variety of permanent or temporary leak stopping applications. - Pack around light cable to seal or prevent leaking light conduit, (removable) - Replace rubber gaskets with or without removing fitting - Fill/seal cracks gaps or voids - Hold in place with a cast of Quick Set Epoxy for pipe repairs

Black Butyl Tape

LeakMaster Pool Repair Putty

Hand moldable epoxy putty in a convenient "one stick" formula hardens above or below water to a bright white. 20-40 minute cure time and convenient packaging make this a logical choice for pool owners who want to make their own repairs. Anderson leakmaster pool putty will Fill and repair cracks in plaster, concrete, fiberglass and PVC - Repair cracks in skimmers, main drains, and fittings.

LeakMaster Pool Repair Putty

A+B Epoxy Putty Kit

Two part hand moldable epoxy putty cures in 40-60 minutes to an attractive white. Critical ingredients of A+B Epoxy Putty are not readily soluble in water assuring a fully cured, superior repair compared to the industry's more common brand. A+B is the perfect choice where appearance is important. - Fill and repair cracks in plaster, concrete, fiberglass and acrylic - Repair cracks in skimmers, main drains and fittings.

A+B Epoxy Putty Kit

Underwater Pool Light Cord Stopper

Eliminates pool light leaks by sealing the conduit where the light cord enters at the back of the light niche. Many underground light conduits will break or collapse over time, allowing water to leak from the pool. Pool Light Cord Stopper seals up the conduit, and is removable (unlike sealants that cure inside of the conduit, making light replacement difficult). Cord Stopper is available in 3/4" or 1" for different conduit sizes.

Cord Stopper - 3/4"

Cord Stopper - 1"