Lubricants for Swimming Pool Equipment Maintenance

Jack's Formula 327 Lube - 1 oz.

Use Jack's formula 327 Lube to lubricate o-rings and gaskets and prolong their life. Jack's formula 327 Lube is a must-have product for all pool/spa owners. Comes in 1 oz. tube.

Magic Lube II - 1 oz.

A silicone based lubricant for use under adverse conditions. Use on Jandy Valves and chlorinator o-rings.

EZ Patch 22 Silicone Sealant - Ceramic Tile Adhesive AND Grout

E-Z Patch 22 Neutral Cure 100% Silicone Rubber

E-Z Patch 22 is for ceramic tile adhesion/grout and other sealant uses. Low odor, UV stable, mildew resistant, and non-corrosive. Excellent bonding to cured masonry surfaces, ceramic tile, fiberglass, wood, fiber optics, and ABS glass. Our white color is low gloss and off white to match regular white cement tile grout. Also available in clear color.

This 10 oz tube fits any standard caulking gun.

Epoxy Putty for Pool Repairs

Epoxy Bond - A-B Pool Putty

Epoxy Bond Pool Putty is a unique two-part, hand-moldable epoxy putty specially formulated for concrete or Gunite pool repairs. It stops leaks, fills cracks, and restores chipped tile. The convenient cartridge form provides a simple, equal mixing ratio (1 to 1). Just cut, mix and fix. There is no need to drain pools to repair leaks and cracks because Epoxy Pool Putty hardens under water. Once cured, it will not shrink or sag.

Each set comes with one stick of Pool Putty Hardener and one stick of Pool Putty Resin. Resin is available in white or black.

Pool Putty - White Putty Set

LeakMaster Pool Repair Putty

Hand moldable epoxy putty in a convenient "one stick" formula hardens above or below water to a bright white. It has a 20-40 minute cure time and convenient packaging make this a logical choice for pool owners who want to make their own repairs.

Anderson leakmaster pool putty will fill and repair cracks in plaster, concrete, fiberglass and PVC - Repair cracks in skimmers, main drains, and fittings.

LeakMaster Quick Set Pool Repair Putty

Hand-moldable epoxy putty in a convenient "one stick" format hardens above or below water to an "off-white" color. Aggressive adhesiveness and fast 5-minute cure time make Leakmaster Quick Set the logical choice for a multitude of non-cosmetic repairs.

Features

• Repair cracks in skimmers, main drains and fittings
• Fill cracks in plaster, gunite, fiberglass, or acrylic
• Pack around light cable to seal leaking light conduit (permanent)
• Create a cast around pipe to hold Butyl Tape in place for plumbing leaks

A+B Epoxy Putty Kit

Two part hand moldable epoxy putty cures in 40-60 minutes to an attractive white. Critical ingredients of A+B Epoxy Putty are not readily soluble in water assuring a fully cured, superior repair compared to the industry's more common brand.

A+B is the perfect choice where appearance is important. - Fill and repair cracks in plaster, concrete, fiberglass and acrylic - Repair cracks in skimmers, main drains and fittings.