| |
|
E-Z Patch® 23
Self Leveling Caulking
Available in 10.3 oz Cartridges
and Now - also available in
29 oz Cartridges
|
“E-Z
Joint Seal” Self-Leveling Expansion Joint Sealant
Available in 10.3 oz. cartridges (24 per case)
or 29 oz. cartridges (12 per case)
See Coverage Chart at Bottom of Page
Since 1997, the first and still the very best formula of Oxime Neutral Cure 100% Silicone
Rubber Expansion Joint Sealant! 2 year shelf life. Can be installed in temperatures as low
as 0° F. Easy clean-up. UV stable with a 50 year life expectancy. Low odor,
non-shrinking, and non-corrosive. No mixing, pouring into different containers, or primer
is needed. No waste. Excellent self-leveling pool caulk with a non-porous, easy to clean surface.
Surface skins over in 20 minutes to 2 hours (depending on age of product) and foot traffic
can be allowed after 12 hours. Not affected by rain after 2 hours.
View
Online Pool Caulking Training Video |
| Mfr. No. |
Item No. |
Description |
Price |
|
| EZP-329 |
A7855 GREY |
10.3 oz Gray Caulk |
$24.99 |
|
| EZP-331 |
A7860 GREY |
29 oz Gray Caulk |
$49.99 |
|
| EZP-337 |
A7855 TAN |
10.3 oz Tan Caulk |
$24.99 |
|
| EZP-339 |
A7860 TAN |
29 oz Tan Caulk |
$49.99 |
|
| EZP-349 |
A7855 WHITE |
10.3 oz White Caulk |
$24.99 |
|
|
Sonneborn NP1
Gun Grade Caulking
Available in 10.3 oz Cartridges
|
Sonneborn NP1 Polyurethane Sealant
is a one-component high-performance gun-grade moisture-curing polyurethane sealant
designed for a wide range of sealing and caulking applications in active exterior joints.
With 800% elongation, 350 psi tensile and +/- 25% joint movement capability, NP-1 handles
most every exterior application. NP 1™ requires no mixing and typically bonds to many
materials without a primer, including concrete and masonry. Dries with a smooth finish and
is paintable.
Gun Grade caulking is much thicker than Self Leveling, and
requires troweling to smooth it out. Use Gun Grade for vertical or uneven expansion joints. |
| Mfr. No. |
Item No. |
Description |
Price |
|
| NP-1G |
A9941 |
Sonneborn NP-1 Grey Pool Caulk |
$8.99 |
|
| NP-1T |
|
Sonneborn NP-1Tan Pool Caulk |
Please call for a quote - 877-POOL-CTR |
| NP-1W |
A9942 |
Sonneborn NP-1White Pool Caulk |
NLA |
No Longer Available |
|
|
Vulkem 45
Self Leveling Pool Caulking
Available in 29 oz. Super Cartridges |
Vulkem #45 Sealants
Caulking specifically designed for swimming pool expansion
joints. Extraordinary adhesion, cohesion, abrasion, and tear
resistance. Vulkem 45 is suitable for continuous water immersion. One part Polyurethane sealant.
Vulkem 45 is a Self leveling sealant suitable for horizontal
surfaces. (see our caulking tips at bottom of page). Self leveling
caulk requires no troweling or taping. Vulkem 45 cures within 24 hours.
See
the Vulkem #45 sealant coverage chart below.
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| MM45GQT |
A9946 |
Vulkem 45 Grey Pool Caulk |
$26.66 |
|
| MM45BFQT |
A9947 |
Vulkem 45 Tan Pool Caulk |
$26.66 |
|
| MM45WQT |
A9945 |
Vulkem 45 White Pool Caulk |
$26.66 |
|
|
|
Vulkem 45 SSL
Semi-Self Leveling Pool Caulking
Available in 29 oz. Super Cartridges |
Vulkem #45 SSL Sealants
Caulking specifically designed for swimming pool expansion
joints. Extraordinary adhesion, cohesion, abrasion, and tear
resistance. Vulkem 45 is suitable for continuous water immersion. One part Polyurethane sealant.
Vulkem 45 SSL is a Semi-Self leveling sealant suitable for horizontal
surfaces. (see our caulking tips at bottom of page). Semi Self leveling caulk
requires minimal troweling or taping. and is not as runny as regular self
leveling pool caulking. Vulkem 45 SSL cures within 24 hours.
See
the Vulkem #45 SSL sealant coverage chart below.
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| MM45SSLGQT |
A9943 |
Vulkem 45 SSL Gray Pool Caulk |
$24.64 |
|
| MM45SSLBFQT |
A9908 |
Vulkem 45 SSL Tan Pool Caulk |
$24.64 |
|
| MM45SSLWQT |
A9944 |
Vulkem 45 SSL White Pool Caulk |
$24.64 |
|
|
|
 |
Use foam Backer Rod to fill in the expansion joint below the
caulking. Buy the size that is slightly larger than the width of your expansion joint. If
the joint has uneven widths, use a razor knife to slice the backer rod into smaller
widths, or buy more than one size backer rod. Measure your pool perimeter for the proper length, and buy a little extra.
Using sand in your expansion joint is a Bad Idea, as it will not allow compression as foam will, and as your deck expands it will exert forces on your pool beam, tile and coping.
|
| Mfr. No. |
Item No. |
Description |
Price |
|
| SBR650 |
A9907 |
5/8 in. Foam Backer Rod - 1 ft. (12 in.) |
$0.12 |
|
| SBR750 |
A9906 |
3/4 in. Foam Backer Rod - 1 ft. (12 in.) |
$0.20 |
|
| SBR1000 |
A9905 |
1 in. Foam Backer Rod - 1 ft. (12 in.) |
$0.36 |
|
|
EZ PATCH 23 & Sonneborn NP1 - Coverage Chart |
|
10.3
oz. Cartridge |
|
DEPTH OF
JOINT* |
WIDTH OF
JOINT |
| 1/4" |
1/2" |
3/4" |
1" |
| 1/4" |
24' |
12' |
9' |
6' |
| 3/8" |
18' |
9' |
7' |
4 1/2' |
| 1/2" |
12' |
6' |
4 1/2' |
3' |
|
Example: One cartridge will
fill a joint 1/2" wide by 1/4" deep by 12 feet long. |
|
*Depth of joint should be 1/3
to 1/2 the width of joint. (1/4" minimum depth) |
|
VULKEM 45 Coverage Chart |
|
29 oz. Cartridge |
DEPTH OF JOINT* |
WIDTH OF JOINT |
| 1/4" |
1/2" |
3/4" |
1" |
| 1/4" |
1 tube |
2 |
3 |
4 |
| 3/8" |
2 |
3 |
5 |
6 |
| 1/2" |
2 |
4 |
6 |
8 |
|
Approximate number of tubes of Vulkem 45 needed per 75
feet of joint. |
| *Depth of
joint should be 1/3 the width of joint. (1/4" min. depth) |
 SWIMMING POOL CAULKING |
 |
Insert the backer rod to a depth of 1/4" into a clean,
dry expansion joint. It is important that you remove all debris or sand first. The
expansion joint should be "True", that is, extend between the deck and the
coping stone, all the way to the earth. |
 |
If the joint is very uneven in width, you can slice the
backer rod with a razor knife to fill in the gaps, or buy more than one size of backer
rod. The rod must fit tightly, as shown in the diagram. Self leveling caulk can be very
runny, especially on a warm day, and you will lose a great deal of caulk that will run
down into the joint. If you have a new pool, and there is a strip of rough, white foam,
about 3/8" wide, already in the joint, this can either be cut down 1/2" with a
razor knife, or burned down with a small gas torch, or just pushed down a bit into the
joint, before adding your backer rod. |
 |
Begin with a dry joint, and make sure there is no rain
forecast for the day. Insert your tubes into the caulking gun, snip the tip, and
puncture the inner seal. Self leveling caulk will come out very quickly. Keep a towel or
sheet of cardboard moving with you around the pool deck.
If your deck and coping are
uneven, fill the joint up to just below the lower level. Runs onto the deck or stone can
be wiped up quickly with a small towel. If the edges are very uneven, tape one or both
sides of the joint with 2" wide masking tape before you begin to caulk your pool. |
 BACK
TO POOL REPAIR SUPPLIES
|
|
