Inflatable Hot Tubs by Spa 2 Go
The Worlds Most Affordable and Truly Portable Spa!
Imagining the luxury of having a spa wherever you go? You don't have to imagine it! Relax in a hot tub wherever and whenever you like without complicated or costly installation. The Spa2Go is the portable spa that inflates in just minutes but has all the vigorous heated jet action of a permanently installed hot tub. The Spa2Go has enough space for four adults, ample room to relax and enjoy heated jets in 250 gallons of water that soothes tight, tired muscles - forgetting the worries of the day.
You can enjoy your Spa2Go in just minutes after opening! Plug into a standard 110v outlet, inflate, and fill from a garden hose. The pump motor will inflate the spa in 10 minutes and the pump system includes a filter to help the water remains clean and fresh. Want hotter or cooler water? Adjust your water temperature up to 104° F with the touch of a button with the Spa2Go's digital thermostatic control panel. Spa2Go includes a built-in seat, cushioned side panels for reclining and relaxing, and a locking cover for child safety. Spa2Go is made of durable K80 vinyl, the same material that white water rafts are made from to deflect pulling, tearing, and punctures.
|
| |
Step 1
Unfold the Liner of your Spa-2-Go; spread it out into a flat position.
|
|
Step 2
Connect the inflator hose (included) to the power-pack on the air blower side (right) to inflate the Spa. Inflate the three valves, plus the interior floor.
|
|
Step 3
Connect all three power-pack fittings to the Spa (hand tighten only!). Then fill your Spa, using a garden hose.
|
|
| |
Step 4
Use the inflator hose (included) to inflate the insulation bladder.
|
|
Step 5
Place the inflated insulation bladder over the filled Spa. Push down on all sides to ensure a tight fit.
|
|
Step 6
Place the top over the Spa; line up the eight cover locks.
|
|
