 The inner core of the Deluxe spa covers are a 1.5 pound density, metal
reinforced EPS foam, tapered from 4" to 2" to allow accumulated water
to easily run off. Maximum cover size is 96" x 96" or 8ft x 8ft.
Many older, and some cheap spa and hot tub covers are made of a flat
foam (or foam with less taper) which allow water to puddle, causing the spa cover to sag,
allowing more water to puddle, eventually breaking the spa cover.
Foam density refers to the weight of a cubic foot of
foam. A 1.5 lb. density is generally the ideal for a 4" thick hot tub cover. It has
excellent strength and insulating ability, yet is light enough to maneuver on and off your
spa. Lesser densities are NOT advised for a cover of this thickness due to it's lack of
strength. Higher foam densities have additional strength, but only slightly more
insulating ability. One of the many spa top options we offer is upgrading to a higher
density foam, if additional strength is needed. These spa and hot tub covers are perfect
for areas of heavy snow, rambunctious children and large dogs (even deer).
The foam is wrapped in a 6 mil polyethylene sheeting
that is heat sealed to prevent water absorption from the underside. Many cheaper
cover manufacturers tape the poly sheeting closed to save costs, but the tape quickly
fails and the cover will start absorbing water, getting heavier and heavier. As an option,
the foam can be doubled wrapped for extra protection from water absorption.
The outer covering of our spa tops is a certified heavy duty
marine grade vinyl which is highly mildew and UV resistant. It was initially developed
as an awning material for the boating industry. It's available in your choice of different
colors and is sewn together with a highly UV inhibited commercial thread
which won't mildew or rot out like some cheaper covers. There's even reinforced handles
for easy removal from your spa and four straps so you can lock the cover
down to your spa.
Our Spa Covers come in 10 attractive colors (shown
below)
Our Deluxe Spa Cover carries a limited 4 year warranty
against defects in materials and workmanship. The cores are warranted against water
absorption for 1 year for single wrapped foam cores, and 2.5 years (30 mos.) for spa
covers with the optional double wrapped foam cores. Our Deluxe Spa Cover sells for $299.95,
with a shipping cost of only $24.95. Order Below, adding optional items if you wish.
INSTRUCTIONS:
First, review all steps listed below. Second, choose your desired
options making note of all specifications, and making sure to add to
cart all Optional
Upgrades, Floating Thermal Blanket (if desired), and the actual cover at the
bottom of the page before submitting your order. For the final step, you
will contacted in a timely manner by a Poolcenter.com Custom Cover Specialist for
specifications.** |
