|
 The inner core of
the Premier spa covers are a 1.0 pound density,
metal reinforced EPS foam, tapered from 6" to 4" to allow
accumulated water to easily run off. Our Premier Spa Top has a R-21
Insulative value. Maximum size is 96" x 96" or 8ft x 8ft.
Many older, and some cheap spa and hot
tub covers are made of a flat foam (or foam with less taper) which allow
water to puddle, causing the spa cover to sag, allowing more water to
puddle, eventually breaking the spa cover.
Foam density refers to the
weight of a cubic foot of foam. A 1.0 lb. density is generally the ideal for
a 6" thick hot tub cover. It has excellent strength and insulating ability,
yet is light enough to maneuver on and off your spa. Lesser densities are
NOT advised for a cover of this thickness due to it's lack of strength.
Higher foam densities have additional strength, but only slightly more
insulating ability. One of the many spa top options we offer is upgrading to
a higher density foam, if additional strength is needed. These spa and hot
tub covers are perfect for areas of heavy snow, rambunctious children and
large dogs (even deer).
The foam is wrapped in a 6 mil
polyethylene sheeting
that is heat sealed to prevent water absorption from the underside.
Many cheaper cover manufacturers tape the poly sheeting closed to save
costs, but the tape quickly fails and the cover will start absorbing water,
getting heavier and heavier. As an option, the foam can be doubled wrapped
for extra protection from water absorption.
The outer covering of our spa tops is a
certified heavy duty marine grade vinyl which is highly mildew and UV
resistant. It was initially developed as an awning material for the boating
industry. It's available in your choice of different colors and is
sewn together with a highly UV inhibited commercial thread which
won't mildew or rot out like some cheaper covers. There's even reinforced
handles
for easy removal from your spa and four straps so you can
lock the cover down to your spa.
Our Spa Covers come in 10
attractive colors (shown below)
Our Premier Spa Cover carries a limited 4 year warranty
against defects in materials and workmanship. The cores are warranted
against water absorption for 1 year for single wrapped foam cores, and 2.5
years (30 mos.) for spa covers with the optional double wrapped foam cores.
Our Premier Spa Cover sells for
$349.95, with a shipping cost of only $29.95.
Order Below, adding optional items if you wish. INSTRUCTIONS:
First, review all steps listed below. Second, choose your desired
options making note of all specifications, and making sure to add to
cart all Optional
Upgrades, Floating Thermal Blanket (if desired), and the actual cover at the
bottom of the page before submitting your order. For the final step, you
will contacted in a timely manner by a Poolcenter.com Custom Cover Specialist for
specifications.** |
