Swim Spa Cover

The inner core of the Swim Spa covers are a 1.5 pound density, metal reinforced EPS foam, tapered from 6" to 2"  to allow accumulated water to easily run off. Maximum cover size is 192" x 96" or 12ft x 8ft. Our Swim Spa covers fit all swim spas by the major manufacturers, including Endless pools, InfinitePool, SwimEx and HydroWorx.

These swim spa covers are very unique and designed to last! Created from a combination of our Deluxe and Premier spa cover, they are fully tapered from 6" in the center to 2" at the outer edge.

Spas more than 8' long (such as swimspas) generally pose a problem when it comes to insulating covers. Because the foam for the cores only comes 4' wide, spa covers longer than 8' require more than two panels. The challenge is with the center panels. While the outer two panels are supported by the spa on three side, the inner panels are only supported at the ends. Because of this, the center panels want to sag. We take some extra precautions to help prevent this.

First of all, we highly recommend against three panel covers. Even though a 12' long spa can be covered with a three panel cover (and initially save a bit of money), a four panel swim spa cover has smaller center panels which gives them more strength and less tendency to sag. All of our swimspa covers are made with four panels!

Secondly, our center panels are made with a TAPERED foam. While the outer panels are made from 4" to 2" tapered, 1.5 pound density, we use 6" to 4" tapered, 1 pound density foam for the center panels. THIS GIVES YOU A FULLY TAPERED COVER. While most others swim spa cover manufacturers use a flat 4" foam for the center panels, a fully tapered cover allows for water run off, and it's the rain water that frequently causes the center panels to sag and then break.

The center panels are also reinforced with metal C-channel on BOTH sides. While this may seem like an obvious necessity for strength, it's frequently overlooked by other swimspa cover makers.

There are lots of shapes and options. Find your shape below and choose the options you want. Please feel free to call us if necessary. Please note, these covers are made to your specification and measurements, we can not be responsible for incorrectly measured covers.

Our Swim Spa Cover sells for $649.95, with a shipping cost of only $59.95.  Order Below, adding optional items if you wish.

INSTRUCTIONS:

First, review all steps listed below.  Second, choose your desired options making note of all specifications, and making sure to add to cart all Optional Upgrades, Floating Thermal Blanket (if desired), and the actual cover at the bottom of the page before submitting your order. For the final step, you will contacted in a timely manner by a Poolcenter.com Custom Cover Specialist for specifications.**

The following steps are necessary, please make note of them and have them available when contacted by our custom cover specialist.

Step 1. From the picture below choose the shape of your cover.

*Please make note of the shape and have it available when contacted by our custom cover specialist.

Z: Calculate radius or length in inches

---

 

Step 5. From the picture below, covers generally have a "skirt" of fabric hanging down the side to cover and protect the edge of your spa (some spas that are flush to a deck may require no skirt, if so choose none), please select that measurement below.

*Please make note of it and have it available when contacted by our custom cover specialist.

 

    

Calculate Skirt Length

 

---

Step 6. These covers come standard with 4 latching straps that are 8" long (see picture below). If you prefer, you may enter your choice for a different length. Additional straps, and the precise location is also possible, but requires ordering by phone.

Strap Length: Calculate strap length in inches

*Please make note of lenght and have it available when contacted by our custom cover specialist.

 

---

Step 7. From the picture below choose the desired location of your latching straps.

Decide which letter below best matches current or desired strap layout above.

*Please make note of it and have it available when contacted by our custom cover specialist.

 

a

b

c

d

 

---

 

Step 8. From the picture below choose a color from the drop down menu  (please note, actual colors may vary slightly from how they appear on your computer).

 

Brown Spa Top	Rust Spa Top	Wine Spa Top	Dark Blue Spa Top	Light Blue Spa Top
Light Grey Spa Top	Dark Grey Spa Top	Green Spa Top	Tan Spa Top	Black Spa Top

 

*Please make note of the color and have it available when contacted by our custom cover specialist.

 

---

 

  Step 9.  Special Instructions: this information will provided by you when our customer service representative contacts you.

 

---

 

Step 10. Please double and triple check your spa cover measurements. If in doubt please don't hesitate to call us.

Once again, we can not be responsible for incorrectly measured covers. 

Please have these measurements available when our customer service representative contacts you.

 

---

 

  Step 11.  Optional Upgrades for your new spa cover. Click the order now button for your desired option(s).

 

Continuous Center Seal	An insulating flap running the entire length of the hinge between the cover's 2 halves. Adds up to 5% more insulating value to your spa cover.	$19.95
Foam Upgrade	Add .5 lb more foam density, which adds slightly to the insulating value of the spa top, but more importantly, adds greatly to the covers strength.	$39.95
Double Wrapped Foam Core	Adding a second layer of heat sealed, 6 mil vapor barrier increases protection against moisture absorption into the spa tops foam core. Increases your spa cover warranty time period by 150%.	$29.95
Reinforced Hinge	This upgrade consists of a strip of nylon webbing running the entire length of the hinge and provides exceptional additional strength!	$24.95

Floating Thermal Blanket
	Designed to float on the water's surface, the floating thermal spa blanket is lightweight and durable. It protects and extends the life of your spa cover while significantly reducing heat loss and chemical evaporation/consumption. Light gray in color and made of ¼" thick closed-cell polyethylene foam, these spa blankets are easily cut to size, and much more resistant to "bunching up" than the bubble blankets. Foam Thermal Blankets consist of two pieces of foam "welded" together in the center. Click the Radio Button Below to add a Floating Thermal Blanket to the Cart
6' square ONLY $49.95   7' square ONLY $59.95   8' square ONLY $69.95