Anthony Pools 1.5in Brass Push-Pull Plunger, Complete, V34016
Anthony Pools 1.5in Brass Push-Pull Plunger, Complete, V34016 is rated out of 5 by 1.
Anthony 1.5in Brass Push Pull Backwash Selector Valve Piston, Cap, and Handle, Complete - V34-016 This Part Is No Longer Made By Anthony Pools, Now Made By Val-Pak - This Replaces Anthony Pools Part Number 004908, and Is Used On The Old Anthony Pools 1.5in Brass Selector Valve, Used with the VA-52 -1.5 and VA-38 Vertical Grid DE Filter. This Part Can also be found on This Anthony Parts Pages
Rated 5 out of 5 by Robust order fulfillment from Bonus, it also eliminated a long time leak I cleaned the 17 inch valve body using Bartender Keeper's Friend and a wire brush attached to a rod and electric drill. The Push-Pull plunger seated in the valve seats fitting like a glove. The included silicone grease pouch is a plus! The stroke action is great. As a bonus a long time pool level water loss was solved!
Date published: 2017-11-13
Related parts recommended for installation or repair
|From $8.54||More info >|