Hayward Trimline Ball Valve 1.5in SP0723

Our Hayward SP0723 Ball Valve has a 1.5” threaded male fitting on one end, 1.5” threaded female opening on the opposite side, with a smooth turning shut-off valve and quick-disconnect union in the center. This in ground or above ground pool pump and filter must-have is ideal for backwashing diatomaceous earth filters. Simply install this valve, add a backwash hose and clamp, open the valve and bump your D.E. filter bump handle to flush debris from the filter. Then close the valve and add more DE as needed (see filter manual for more detailed directions). The Hayward ball valve can also be used to drain or lower your pool water level for winterizing!

For use with the Hayward Perflex pool filter models EC30, EC40, EC50, EC65, or EC75 for backwashing. Use with Hayward X-Stream, Easy-Clear, Star-Clear, SwimClear or most any brand cartridge filter with 1.5” bottom drain for lowering your water level. Just remove the 1.5” drain plug and replace with the SP0723 Hayward ball valve. Shut-off handle is removable to prevent accidental opening and draining of the pool.

Hayward Trimline Ball Valve 1.5in SP0723
Manufacturer#: SP0723
Item#: E2342
    Back to